Hindustan Engineers

Sensor type water cooler automatic water dispencing tap can be fitted with water cooler without doin any modifications. sensor tap has 1/2" bsp male thrds whch is universal for all manual tap

The transair Airblade Wash+Dry hand dryer is compatible with most
basin types. Ensure plugs are not installed in the basins and avoid
inserts with embedded plugs (e.g. ones that swivel or elevate).
Using a specially designed test method, Dyson engineers evaluated
the user experience of a wide range of basin types when used with
the Dyson Airblade Wash+Dry hand dryer. For further details on our
recommended basins, please see the guide on our website dyson.co.uk/docs
We recommend avoiding basins with the following geometric characteristics;
Flat bases immediately surrounding the drain hole.
(nominally within a 60 mm radius).
Sloping back and front wall transitions in relation to the base of the basin.
See our pre-installation guide for further details: dyson.co.uk/docs
Basin dimensions:
All basin measurements are internal unless stated otherwise.
Minimum width of basin: 350 mm, Front to back - Minimum: 300 mm
Minimum depth of basin: 100 mm
Maximum depth of basin for WD05 only: 200 mm
(External measurement of vessel basin)
Basin materials: Basins with highly polished surfoces should be avoided,
e.g. reflective chrome. Porcelain or brushed metal is ideal. When multiple
taps are installed side-by-side, tap centres should be a minimum
of 580 mm apart.